HYUNDAI WELDING

Business Introduction

ALL PRODUCT

Flux & Wire Combination

S-717 x L-8

S-717 S-717 x L-8

Type
Industry
JIS
EN
KS
AWS
TTR
  • Caution
  • Purpose
  • Attribute

S-717 x A-2

S-717 S-717 x A-2

Type
Industry
JIS
EN
KS
AWS
  • Caution
  • Purpose
  • Attribute

S-717 x M-12K

S-717 S-717 x M-12K

Type
Industry
JIS Z3352 S A AB 1 / Z3351 YS-S3
EN ISO 14174 S A AB 1 / 14171 S2Si
KS B0531 S502-H
AWS A5.17/ASME SFA5.17 F7A(P)6-EM12K
  • Caution ① Dry at 300~350°C (572~662°F ) for 60 minutes before use.
    ② In case of multi-layer welding of the thick plate, to prevent cracks, low current and low speed welding should be performed on the lower layer.
    ③ If weld heat input is managed below 30KJ/cm, a better impact toughness can be achieved.
    ④ When restraint stress is high or welding a thick plate, preheat according to rules.
  • Purpose ① Pressure vessels
    ② Windtower
    ③ Structural steels
  • Attribute ① Good performance with thick plates
    ② Good resistance to crack
    ③ Density : 1.1g/cm3
top