JPN

HYUNDAI WELDING

事業紹介

ALL PRODUCT

サブマージアーク溶接材料

Superflux 55ULT
炭素鋼及び低合金鋼材料

Superflux 600
炭素鋼及び低合金鋼材料

Superflux 787
炭素鋼及び低合金鋼材料

Superflux 800T
炭素鋼及び低合金鋼材料

S-460Y
炭素鋼及び低合金鋼材料

S-707
炭素鋼及び低合金鋼材料

S-707T
炭素鋼及び低合金鋼材料

S-705EF
炭素鋼及び低合金鋼材料

S-705HF
炭素鋼及び低合金鋼材料

S-717
炭素鋼及び低合金鋼材料

S-777MX
炭素鋼及び低合金鋼材料

S-777MXH
炭素鋼及び低合金鋼材料

S-777MXT
炭素鋼及び低合金鋼材料

S-777Q
炭素鋼及び低合金鋼材料

S-787TB
炭素鋼及び低合金鋼材料

S-800WT
炭素鋼及び低合金鋼材料

S-800MX
炭素鋼及び低合金鋼材料

S-900SP
炭素鋼及び低合金鋼材料

S-950S
炭素鋼及び低合金鋼材料

Superflux 300S
ステンレス鋼材料

S-300B
ステンレス鋼材料

S-401HF
表面硬化肉盛材料

S-402HF
表面硬化肉盛材料

S-Ni2
ニッケル合金鋼材料

Superflux600 x A-3

Superflux 600 Superflux600 x A-3

Type
Industry
JIS Z3352 S A AB 1 / Z3351 YS-M5
EN ISO 14174 S A AB 1 / 14171 S4Mo
KS
AWS A5.23/ASME SFA5.23 F8A(P)4-EA3-G
Catalog MSDS TTR
  • Caution ① Dry the flux at 300~350℃ (572~662°F ) for 60 minutes before use.

    ② In case of multi-layer welding of the thick plate, to prevent cracks, low current and low speed welding should be performed on the lower layer.

    ③ If weld heat input is managed below 31KJ/cm, a better impact toughness can be achieved.

    ④ When restraint stress is high or welding a thick plate, preheat according to rules.
  • Purpose ① Structure fabrication (HSB500(SM490) and HSB600(SM570))
  • Attribute ① Good bead appearance

    ② Easy to remove slag

    ③ Good resistance to pockmarks and pits

    ④ Density : 1.2g/cm3

Superflux600 x H-14

Superflux 600 Superflux600 x H-14

Type
Industry
JIS Z3352 S A AB 1 / Z3351 YS-S6
EN ISO 14174 S A AB 1 / 14171 S4
KS
AWS A5.17/ASME SFA5.17 F7A(P)6-EH14
Catalog MSDS TTR
  • Caution ① Dry the flux at 300~350℃ (572~662°F ) for 60 minutes before use.

    ② In case of multi-layer welding of the thick plate, to prevent cracks, low current and low speed welding should be performed on the lower layer.

    ③ If weld heat input is managed below 31KJ/cm, a better impact toughness can be achieved.

    ④ When restraint stress is high or welding a thick plate, preheat according to rules.
  • Purpose ① Structure fabrication (HSB500(SM490) and HSB600(SM570))
  • Attribute ① Good bead appearance

    ② Easy to remove slag

    ③ Good resistance to pockmarks and pits

    ④ Density : 1.2g/cm3
top