ALL PRODUCT
Soudage à l'arc submergé
Superflux600 x A-3
-
Caution
① Dry the flux at 300~350℃ (572~662°F ) for 60 minutes before use.
② In case of multi-layer welding of the thick plate, to prevent cracks, low current and low speed welding should be performed on the lower layer.
③ If weld heat input is managed below 31KJ/cm, a better impact toughness can be achieved.
④ When restraint stress is high or welding a thick plate, preheat according to rules. - Purpose ① Structure fabrication (HSB500(SM490) and HSB600(SM570))
-
Attribute
① Good bead appearance
② Easy to remove slag
③ Good resistance to pockmarks and pits
④ Density : 1.2g/cm3
Superflux600 x H-14
-
Caution
① Dry the flux at 300~350℃ (572~662°F ) for 60 minutes before use.
② In case of multi-layer welding of the thick plate, to prevent cracks, low current and low speed welding should be performed on the lower layer.
③ If weld heat input is managed below 31KJ/cm, a better impact toughness can be achieved.
④ When restraint stress is high or welding a thick plate, preheat according to rules. - Purpose ① Structure fabrication (HSB500(SM490) and HSB600(SM570))
-
Attribute
① Good bead appearance
② Easy to remove slag
③ Good resistance to pockmarks and pits
④ Density : 1.2g/cm3